SimuCube 2: Changelogs und Updates

  • Grainy feel fix

    • Some tuning parameters were changed in the servo drive to get back to 2020.1 behavior.

    Small changes and fixes

    • Disconnection of a wireless wheel will not cause torque to be disabled, unless the wheel had a torque off switch configured.
    • After unlocking locked profile settings, they can be relocked again.
    • Audible beeps enabled/disabled checkbox also affects wireless wheel status beeps.
    • Physical sequental shifter connected to the D15 Accessory Port will map to same pins as the Simucube Wireless Wheel shifter paddles. This can be configured per-profile.
    • There is a command line option 'trayminimized' to launch True Drive to Tray Icon in minimized state (window is not shown).
    • Remove Simucube 1 overvoltage fault detection that was sometimes triggered when it was not actually the fault cause.
    • Added detection of possibly low wireless wheel battery in some situations where battery voltage remains high but the battery voltage would drop under load.

    Upcoming in the next releases

    • We decided to release 2020.4 due to some important fixes, and these features were not completed in time:
    • Bumpstop rework, including safety and ease-of-use changes
      • Bumpstop effect has been simplified. All bumbstop settings have 100% power, and there are three well-tuned settings (soft/medium/hard) available.
      • Bumbstop setting is now a per-profile setting.
    • Internal device telemetry data sync event does not cause wheel torque to be at zero anymore. This mainly affected non-FFB game titles.

    Quelle: Simucube_2_True_Drive_2020.4.zip

  • Quelle: https://granitedevices.com/w/i…e_2_True_Drive_2020.7.zip

  • Quelle: https://granitedevices.com/w/i…_2_True_Drive_2020.10.zip

  • Bumpstop behavior fix

    • Changed bumpstops to avoid issue where the bumpstop force could be overcome by game-generated FFB in some cases.

    Torque tuning changes and audible changes

    • Fix constant audible tone issue in some Simucube 2 Sport and Pro R2 units
    • Change the long beep of going to standby mode to more informative tone.
    • Adjust controller tuning to reduce other audible noises from the motor.
      • This will be tuned further based on feedback from this 2021.1 release.

    Quelle: https://granitedevices.com/w/i…e_2_True_Drive_2021.1.zip

  • Bumpstop behavior fix

    • Changed bumpstops to avoid issue where the bumpstop force could be overcome by game-generated FFB in some cases.

    Torque tuning changes and audible changes

    • Fix constant audible tone issue in some Simucube 2 Sport and Pro R2 units
    • Change the long beep of going to standby mode to more informative tone.
    • Adjust controller tuning to reduce other audible noises from the motor.
      • This will be tuned further based on feedback from this 2021.1 release.

    Quelle: https://granitedevices.com/w/i…rive_2021.1_repackage.zip

  • Quelle: http://www.solidfiles.com/v/BVjjRM4XXjw5r

  • Simucube 2 True Drive Paddock Early Access release

    • Release is the same as 2021.4_4 but with Simucube 2 True Drive Paddock Early Access.
    • See our FAQ for details.
    • Community forum thread is here.
    • You can also leave feedback by clicking the Feedback button directly in True Drive.

    Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package from Microsoft's server if you get msv dll errors when you try to start True Drive.

    Quelle: https://granitedevices.com/w/i…_Paddock_Early_Access.zip

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!